Despite any information provided by the seller, this product is not intended for the diagnosis, cure, mitigation, treatment or prevention of any disease. It is not a dietary supplement, it is not a drug, and should not be used for any medical purposes.

—–

1: The protective glass over the lens in the most important and fragile part of the thermometer,please take great care of it
2:Clean the glass with cotton fabric,wet with water or70℃ alcohol
3:Don’t ues other battery than mentioned battery,don recharge non rechargeable battery
4:Do not ecpose the thermometer to sunlight or water
5:Long time bo use,take out the battery
6:The temperature is for reference only.If you feel uncomfortable,please go to the hospital in time.

Instructions
1:lnstall battery
2: For the first use or when inserting new battery,wait 10mins for the warm-up of the apparatus.
3:Aim towards the forehead(see the diagram below for the positioning) form a distance of 5CM(2in).press the measuring key,the temperature is displayed immediately.Making sure there is no hair,perspiration.cosmetic or capcovered on the forehead.
4:When the room temperature is significant difference or there is perspiration on the forehead,you can take the temperayure behind the ear lobe.Making sure there on hair,perspiration,cosmetic or cap covered.

Set-1
3:Power on,press “A” button 3s,display show the”F1″ press 2times again”A” button then show”F3″,press switch button increase 0.1℃.press”B” button reduce0.1℃,press”A”button to cnfirm setting(Factory defaules is O℃C)4:Buzzer ON/OFF setting-F4Power on.press A” button 3s,display show the”F1″press 3times again”A” button then show”F
4″.press switch button is buzzer ON(there’s a horn sign on the screen).press”B” button is buzzer OFF,”+”button to confrim setting (Factory defaults is ON)5:Exit setting modelIn the F4 mode,press”A”button again,the screen off then exit setting
5:Exit setting modelIn the F4 mode,press’A”button again,the screen off ,then exit setting

SetPress the A button for 5s and enter the settings
1:Temperature unit setting-F1Power on,press”A” button 3s,display show the”F1 switch button is ℃,”B” button is “F”.Press “A” button to confirm setting (Factory defaults℃
2:Alarm temperature setting-FPower on,press “A” button 3s,display show the”F1″ press again”A” button then show”F2″,press switch button can increase 0.1℃,press”B” button can reduc0.1℃,press”A”button to cnfirm setting Factory defaules is 38C)
3:Temperature shifting setting-F3Purpose:Adjust the measuring deviation of the instrument,people who adapt to different colors(it is not recommended to change this setting
Advice for the first time use
For stable and reliable results, it is essential to check the Non-contact body IR thermometer and change as needed.as follows
① Install the battery correctly and confirm the power on
②) To ensure the accuracy of the use,please test the forehead,and keep the disrance between the thermometer and forehead about 5CM.Button descriptionLarge button is switch button,also it’s a measuring button When set,large button is”+”.
button B is “.Short time press the button”A”, switch to the body/surface temperature.Body temperature(32-42.5℃),surface temperature(0-100℃)The screen show the “LO1:The temperature is analyzed under the measuring range selected less than 32℃ in bodv mode2:
Temperature read hampered by hair or by perspiration or by an air flux3:The measuring distance is too far4:Temperature readings too close togeter, the body thernometer didn’t have the chance to boot itself.

The screen show the “LO”
1:The temperature is analyzed under the measuring range selected less than 32℃ in bodv mode.
2Temperature read hampered by hair or by perspiration or by an air flux
.3:The measuring distance is too far

4:Temperature readings too close togeter.the body thernometer didn’t have the chance to boot itself

Product type: Baby Thermometers